The material list below is a standard list of materials required for a typical solar pool heater installation.

Standard Panel Hardware Kit Includes:
• 2 - 3" Rubber Couplings
• 5 - Stainless Steel Hose Clamps
• 4 - Header/Strap Stainless Steel Butterfly Clips
• 4 - #14 1/4"x1.5" 3/8" Hex Head Stainless Steel Screws
 

Row Kit Includes: 
• 1 - End Plug
• 1 - Vacuum Breaker 
• 2 - CPVC Panel Adapters
• 2 - PVC Reducer Bushings
• 2 - PVC Couplings

Note: 2" System Plumbing Standard

Double Row Kit Includes: [1 Per Double Row]
• 2 – 1.5” End Plugs
• 2 – 1.5” CPVC* Panel Adapters
• 2 - 1.5"x2" PVC Reducer Bushings
• 2 - PVC Tees

Split Kit Includes: [1 Per Split]
• 4 – 1.5” CPVC* Panel Adapters

• 4 - PVC Couplings
• 4 - 1.5"x2" PVC Reducer Bushings
 

Plumbing Kit Includes: 
 

Plumbing Valves: 
• 1 - 1.5" ID / 2" OD 3-Way Manual Control Valve
• 2 - 1.5" ID / 2" OD Check Valves

PVC Pipe Fittings: 
• 18 - 2" PVC 90 Degree Elbows 
•   2 - 2" PVC 90 Street Elbows
• 18 - 2" PVC Couplings 
•   1 - 2" PVC Tee
•   1 - 2" x 1 1/2" PVC Flush Bushing

Mounting Parts & Accessories: 
• 12 - 2 1/2" Galvanized Pipe Clamps
•   2 - #14 - 1/4" x 1 1/4" - 5/16" Tapcon Hex Head Screws

• 28 - #14 1/4"x1.5" 3/8" Hex Head Stainless Steel Screws

•   1 - Tube Sealant
 

Hold Down Strap

4 ft x 8 ft | 2 Rows of Strap | 9 ft Per Panel

4 ft x10 ft | 3 Rows of Strap | 13.5 ft Per Panel

4 ft x12 ft | 3 Rows of Strap | 13.5 ft Per Panel

2" Pipe per ft [Typical amount shown below]

Up to 4 Panel System = 100 ft 

5 to 7 Panel System = 120 ft

8 to 12 Panel System = 140 ft

13 to 18 Panel System = 160 ft

Note: PVC Pipe is not included in our kits; PVC pipe should be Schedule 40