Techno-Solis 2" Header 4x12 Solar Pool Heater Panel
The Techno-Solis 4x12 Solar Pool Heater Panel features a commercial-grade 4' x 12' solar pool collector with 2-inch headers. It can be used to replace a compatible existing solar pool panel, expand an existing solar heating system, or as part of a new solar pool heating installation.
Replacement compatibility depends on the existing panel dimensions, header size, connection spacing, plumbing configuration and mounting method. Always compare your existing panel measurements with the Techno-Solis specifications before ordering.
Header Size: 2" nominal — 1.89" I.D. / 2.31" O.D.
Panel Only: Connecting and mounting hardware is not included unless purchased separately.
Replacement Panel Comatibility Check: Click Here
System Sizing Calculator: Click Here
Installation Manual: Click Here
Techno-Solis Panel Datasheet: Click Here
Typical Installation Surfaces: Shingle roof, barrel tile roof, flat tile roof, metal roof with plywood decking, metal roof with purlins, wood-frame rack, aluminum-frame rack and steel-frame rack when installed with the appropriate mounting hardware and installation method.
Product Information
The Techno-Solis 4' x 12' | 2" Header Solar Pool Panel can be used to replace a damaged or leaking solar pool panel when the dimensions, header connections and mounting configuration are compatible with the existing system.
It can also be added to a properly designed existing solar pool heating system to increase collector area or used as part of a completely new solar pool heating installation.
A basic panel change-out may be manageable for an experienced DIYer when the replacement panel is compatible with the existing system and the existing connecting and mounting hardware can be reused.
Important: Solar pool panels can vary in overall dimensions, header size, header spacing, connection method and mounting configuration — even between different models from the same manufacturer. Always measure your existing panel and compare those measurements with the Techno-Solis specifications before purchasing.
Replacing an Existing Solar Pool Panel?
Do not assume compatibility based only on the manufacturer name or nominal header size.
Before ordering, confirm:
- Overall panel width
- Overall panel length
- Header diameter
- Header-to-header spacing
- Existing connection method
- Plumbing configuration
- Mounting configuration
- Condition of the existing connecting and mounting hardware
Use our Replacement Solar Pool Panels page to help identify and compare your existing system.
Contact us before ordering if you are uncertain whether this panel is appropriate for your replacement project.
Product Applications
- Replace a damaged or leaking compatible solar pool panel
- Replace one or more panels within an existing solar pool heating system
- Expand a compatible existing solar pool heating system
- Increase collector area when the existing system design and available flow allow
- Combine compatible panel lengths to accommodate available installation space
- Use as part of a new solar pool heating installation
- Heating residential in-ground swimming pools
- Heating above-ground swimming pools
- Qualifying commercial swimming pool applications
- Roof-mounted installations
- Ground-mounted and ground-rack installations
Compatibility Note: A matching 2-inch nominal header does not by itself guarantee compatibility. Panel dimensions, connections, plumbing and mounting requirements must also be confirmed.
Product Function
Techno-Solis solar pool panels use energy from the sun to heat swimming pool water. The pool circulation pump moves filtered water through the solar collector, where solar energy warms the water before it returns to the pool.
Individual collectors are connected together to create a solar panel array sized according to the pool, climate, available installation area and desired heating performance.
A properly sized and installed solar pool heating system can help:
- Increase pool water temperature
- Extend the usable swimming season
- Reduce dependence on gas heaters and electric heat pumps
- Maintain a more comfortable swimming temperature using available solar energy
Actual heating performance depends on collector area, available sunlight, roof direction, orientation, shade, weather, wind, pool exposure, circulation time, pool size, heat loss and whether a pool cover is used.
Important: Adding additional collector area can increase the system's available heating capacity, but attainable pool temperature will always depend on weather conditions, system sizing and pool heat loss.
Product Benefits
- Helps extend the usable swimming season
- Uses available solar energy to heat circulating pool water
- Uses the existing pool circulation system
- Requires relatively little routine maintenance
- Commercial-grade solar pool collector construction
- Modular design allows compatible collector area to be added when system design permits
- Suitable for many roof and ground-rack applications
- Can reduce reliance on conventional gas and electric pool heating equipment
- Suitable for replacement, expansion and new-system applications
- Free system-sizing assistance
- Free installation technical support
Techno-Solis Panel Features
- Commercial-grade Techno-Solis solar pool collector
- 4' x 12' nominal panel configuration
- 2-inch nominal headers
- Heavy-duty polymer absorber construction
- Designed for use as part of a modular solar pool heating array
- Suitable for compatible roof-mounted installations
- Suitable for properly constructed ground-mounted racks
- Can be used for compatible panel replacement
- Can be incorporated into new solar pool heating systems
- Manufacturer's limited warranty
- Free system-design and sizing assistance
- Free installation technical support
Techno-Solis Panel Specifications
- Panel dimensions: Approximately 4' x 12'
- Header size: 2" nominal
- Header I.D.: 1.89"
- Header O.D.: 2.31"
- Construction: Heavy-duty polymer absorber
- Water-flow channels: 104 elliptical channels
- Design: High-flow, low-pressure solar pool collector
- Application: Swimming pool water heating
- Configuration: Designed to connect with compatible collectors to create a solar panel array
Always verify actual panel dimensions and connection requirements before using this collector as a replacement for another manufacturer or model.
What Is Included
This product includes:
- 1 — Techno-Solis 4' x 12' solar pool panel with 2-inch headers
Not Included
The following components are not included with this panel-only product:
- Panel connecting hardware
- EPDM rubber couplings
- Hose clamps
- Header mounting clips
- Hold-down strapping
- Mounting fasteners
- Row Kit
- Vacuum-relief valve
- Feed and return plumbing adapters
- PVC plumbing components
- Solar controller or valves
If your existing connecting or mounting hardware cannot be reused, additional hardware will need to be ordered separately.
Contact us if you need help determining which components are required.
Processing and Delivery Information
Techno-Solis solar pool panels typically require approximately 7–14 business days for order preparation before shipment, plus standard transportation time.
Order processing begins on the next business day when an order is placed after 2:00 p.m. Eastern Time.
Longer processing times may occur during the peak solar pool heating season, particularly from March through August.
Shipping method depends on the number of panels ordered and the delivery destination. Smaller panel orders may qualify for parcel shipping, while larger orders generally ship by LTL freight on a pallet.
Important Freight Delivery Information
When an order ships by LTL freight, the delivery driver may require the purchaser to assist with unloading the panels from the truck. Liftgate service may be available for an additional charge.
Inspect the entire shipment before signing the delivery receipt.
- Note any visible damage on the delivery receipt
- Photograph the shipment before unpacking
- Inspect all panels and components after delivery
- Do not discard the packaging until the entire shipment has been inspected
View delivery, inspection and unpacking information
Product Manufacturer
Manufacturer: Techno-Solis, Inc.
Manufactured in: Florida, USATechno-Solis solar pool collectors are designed for efficient water circulation and heat transfer in properly designed solar pool heating systems. Their modular configuration allows them to be used for compatible panel replacements, system expansions and new solar pool heating installations.
Product Documents
Review the available product documents before ordering or beginning your installation.
- Techno-Solis Installation Manual — Panel assembly, mounting and plumbing instructions
- Techno-Solis Product Specifications — Panel dimensions, header measurements and technical information
- Techno-Solis Manufacturer's Warranty — Warranty coverage, conditions and claim requirements
Need help confirming compatibility or determining what additional hardware is required? Contact us for free system-design and technical support.
